 |
 |
 |
|
 |
[ Click the headers to reveal more information ] |
 |
Fiberglass and Lath Waterproof Deck Coating |
|
|
This is an extremely tough, metal lath reinforced fiberglass deck coating system that is designed to be used over new and previously coated plywood walking deck surfaces. Best of all, this system has been formulated to be the fastest installing system of its type on the market. Fast installation keeps labor costs down, clients happy, and construction schedules on track. The system used is a Class-A, one hour Fire resistance with ICC Approval and is accepted by all building departments.
|
|
|
|
Fiberglass Waterproof Deck Coating |
|
|
This system is designed to be used over virtually any walking surface. The deck coating can be installed over new areas, such as concrete as well as previously coated plywood. It can also be applied over other deck coatings such as Magnesite, Elastomeric, Epoxy Stone, tiled decks, etc. The system composition is a high quality water-based acrylic, allowing it to dry fast and be walked on in-between coats. This decking system is built using Fiberglass and High quality Acrylic Resins to provide a waterproof walking deck surface that will withstand the tests of time.
|
|
|
|
Metal Lath Waterproof Deck Coating |
|
|
This Waterproof Deck Coating System is intended for smaller decks where an extremely economical deck system is required. J.T. Harris Inc. installs this system using Metal Lath, Acrylic Modified Mortar and Acrylic Deck Seal as the Protective Top Coat. This is a Breathable Deck Coating System that will avoid dry rot damage to the plywood substrate from trapped moisture.
|
|
|
|
Urethane Waterproof Deck Coatings |
|
|
J.T. Harris Inc. utilizes several flexible coating Systems offering pedestrian & vehicular systems, roof coating systems, buried membrane systems and wall coating systems. Flexible coatings are dependably waterproof, resistant to cycles of freeze-thaw, substrate expansion and contraction, ozone and the ultra-violet rays of sunlight. Urethane Deck Coatings are tough enough to withstand motor vehicle decks and ramps. Repairs are easily and permanently made due to the coating’s ability to adhere tenaciously to itself through a molecular interlock. Depending on the desired slip-resistance you are looking for, the surface texture can be varied as well as the colors and surface finishes. You can use the Urethane Deck Coating any place where hard-usage surface is wanted, but leakage is not.
|
|
|
|
Parking Structures |
|
J.T. Harris Inc. specializes in wear-resistant, waterproof membranes on vehicular traffic decks. Utilizing a breakthrough Water Catalyzed Polyurea-Urethane resin binder (with entirely new capabilities and versatilities that were never available with the “old technology”) offers a unique balance of tensile strength, elongation and hardness. This balance of physical properties contributes to its resistance to abrasion and tearing, resulting in outstanding flexibility, wear and impact resistance. Our vehicular waterproof membranes are rapid curing solvent-free systems enabling fast, high build coats. It is a durable, abrasion-resistant coating that waterproofs and protects occupied spaces below, while isolating the substrate from the destructive forces of gasoline, oil, salts, solvents, cleaning compounds and other chemicals associated with parking deck structures. Various types of aggregate can be broadcast into the product to provide a non-skid surface.
Advantages:
- Seamless, Monolithic Waterproofing Membrane System
- Excellent adhesion to sound, solid, dry substrates
- Can be installed over new and existing surfaces
- Maintains elastomeric properties at high temperatures
- Resists degradation from sun, ozone and weather
- Superior chemical resistance to oils, fuels and many chemicals
- Outstanding long-term durability and performance
- Superior resistance to damage caused by flexing and twisting
|
|
|
|
Under Tile |
|
J.T. Harris Inc. utilizes an Anti-Fracture Waterproof Membrane in order to provide waterproofing and crack resistance for thin-set ceramic, stamped overlayments, terrazzo, quarry and stone tile. This membrane can be installed over any sound subsurface, being that it is a thin load bearing anti-fracture waterproof membrane. It is composed of an asphalt modified latex elastomer and can be reinforced with polyester fabric. Its thin section provides excellent elongation, strength and positive waterproofing while inhibiting the transferal of cracks from the substrate to the finished surface. We install the membrane in a semi-fluid state and can be applied to practically any form or irregular shape (i.e. parapets, walls, base flashings, etc.)
Advantages:
- Fast drying, ready for overlay in 24 hours
- Helps to reduce on-grade hydrostatic pressure
- Flexible & Elastic Membrane
- May be turned up for base flashing and applied to walls for wainscot or shower wall application
- Low Odor, Alkali Resistant and Water-Based
- Bonds well to many surfaces
J.T. Harris Inc. specializes in all your waterproofing needs which include the above descriptions as well as:
- Planters
- Retaining Walls
- Between Slab
- Fountains & Ponds
|
|
|
|
|
 |
|
 |
|
|
|
|
|
|
 |
If you would like to receive our folder with in-depth information on the services we offer, please click the graphic to fill out our
Literature Request form. |
|
|
|
|
|
|
|
